Kathrein UFS 922 si, UFS 922 sw manual 126

Main menu - Settings

Symbol Rate

The symbol rate is positively assigned to each saved transponder, and cannot be changed.

Polarization

The polarization is positively assigned to each saved transponder, and cannot be changed.

Edit transponders

By pressing the  button you can call up the input screen which allows you to edit/change the settings of the previously selected transponder.

Frequency:

Here you are shown the selected transponder to be edited. The transponder frequency cannot be changed.

DVB Type:

Select here whether the selected transponder is to receive standard channels (DVB-S (SD)) or HDTV channels (DVB-S2 (HD)).

Error rate:

You only need to input the error rate if this is a transponder for reception of HDTV channels (DVB-S2 (HD)). You can choose between the following error rates: QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.

Polarization:

Select here the applicable polarization for the selected transponder. Either “Horizontal” or “Vertical”.

Symbol Rate:

Use the numeric keypad to enter the related symbol rate.

When all settings have been made, press the button to save the changes.

126