Tuner Configuration
The following display appears:
Use the buttons to select “Satellite 1: ****” and press the button.
The following display appears:
Satellite and position:
Select here the satellite you desire from the available
satellites. By pressing the button at this point you can view a list of the satellites saved in the receiver.
Use the buttons to select the satellite you want
and confirm your selection with the button.
Select the “Test Transponder” field. Here you can select a transponder for checking the signal strength bar and signal quality bar to see whether your settings are correct.
If no connection can be established to the one cable system, check your settings (transmission channel and frequency) and if necessary call for expert help.
When all settings have been made, press the button to exit the menu.