89 GB
Advanced settings
Advanced settings
TOSHIBATF 831/861
15-03-97 SAT 19:56
TRANSMIT AVAILABL E
LOAD DOCUMENT
RESIDUAL MEMORY 100 %
Delayed fax job
You can define a specific start time for
your fax jobs in order to compensate for
any differences in time zones or in order
to take advantage of low-rate charges.
Again, it is particularly advantageous that
your document or documents are not read
into memory, as the document feed is not
blocked.
The subsequent time defined for the
action is also not limited to one specific
day. You can program the fax job up to 30
days in advance.
The setting of the start time
relates to the following fax jobs:
• Single transmission
• Broadcast transmission
• Single polling
• Multiple polling
Standby mode
Load original
Remember:
Printed side face down
Document ready
Open the one-touch dial cover
Press the Shift key and then the
corresponding function key
Make your selection
for start time (HH:MM) and day (DD)
Enter the start time
Example: 22:33 hours on the 18th
If the delayed fax job is to be
carried out on the same day, do
not enter any information under
“DD”.
The following fax job is linked to the start
time which has just been set.
Any fax job...
• Single transmission
• Broadcast transmission
• Single polling
• Multiple polling
SHIFT DELAYED COMM
DELAYED COMM.
TIME =HH:MM DD
nn:nnnn
DELAYED COMM.
TIME =HH:MM DD
23 : 33 18
RESIDUAL MEMORY 100 %
ENTER TEL NUMBER
COMM. RESERVATION