Toshiba TF831/861 manual Retain jobs, Input retaining time, Preset retaining time is displayed

Advanced settings

Retain jobs

If a job cannot be transmitted because for instance the partner fax is busy, your fax machine attempts to redial the number at regular intervals of approx. 2 minutes*. After the XXth* redialling, the job will be automatically deleted from the stack and a transmission report (see page 83) will be printed out. To prevent the deletion of such a job use this procedure. Each job will then be available for a certain time (1-24hours). If this job can not be suc- cessfully sent during this period it will be deleted automatically from the memory. Every time you retain a job in memory your fax prints out a transmission report (see page 83) to inform you how long this job will be retained in memory. To send retained jobs see page 54.

*) Depending on setting (see page 92)

If too many documents are retained in memory, the fax memory will become full since every retained job requires memory.

If you find that the memory is frequently too small, ask your dealer for a memory expansion!

15-03-97 SAT 19:56

TRANSMIT AVAILABLE RESIDUAL MEMORY 100 %

LOAD DOCUMENT

1.COMM. OPTIONS

2.LISTS

3.INSTALLATION 4.MENU LIST

/ /

RECOVERY TRANSMIT 1.ON

2.OFF

RECOVERY TRANSMIT

STORED TIME =(01-24)

06

START

STOP

Standby mode

Start the menu

The first 4 menu items are displayed.

Select a menu item

Make your selection for retain job

Select a menu item

Make your selection for retaining time

(preset retaining time is displayed)

Input retaining time

-and/or-

confirm with START

Press STOP, return to standby mode

GB 100 Advanced settings TOSHIBA TF 831/861