Toshiba TF831/861 manual Redial

Transmit documents

Redial

If it was not possible for your fax message to be sent, this may be due to various reasons (please read page 113). One reason may be that the other fax machine is busy. In this case, it would make sense to call your partner again at a later time. This is done automatically by your fax; it attempts to send the fax message again approx. every 2 minutes.

You are able to individually set the period between the call

redial attempts and also the number of redial attempts (see page 92).

Manual call redial (from memory):

If the memory contains a job which you wish to redial immediately, you can select this job and manually select the redial procedure (see adjacent diagram).

Manual call redial (from document feed):

If you have established a call via the MONITOR key, you can activate the redial function by pressing the REDIAL/ PAUSE key.

15-03-97 SAT 19:56

TRANSMIT AVAILABLE RESIDUAL MEMORY 75 % LOAD DOCUMENT

REDIAL

PAUSE

REDIAL [ENTER]:START

[G]:PREVIOUS SCREEN [H]:NEXT SCREEN

after 5 seconds

SINGLE TRANSMIT

Toshiba Europa

21-03-97 19:33

FILE NBR = 008

/

Manual call redial (from memory)

Standby mode

Requirement:

There must be at least one job which has already been dialled and not transmitted.

Press the REDIAL/PAUSE key

Make your selection

for selecting the required job

The first available job is displayed. Please refer to page 56 for details of the job format.

Select the job which you want to redial.

Confirm with START

START

REDIAL

NUMBER NOT LISTED

The job is carried out again.

If there is no job available for the redial facility, the machine displays the following message:

TF 831/861 TOSHIBA Transmit documents 53 GB