Kathrein UFS 922 si, UFS 922 sw Recording settings, Automatic Timeshift, Timeshift Buffer Size

Main menu - Settings

Recording settings

After calling up the menu you will see the following display:

The individual items are selected using the  buttons. Changes to the current settings can be made

using the buttons.

Automatic Timeshift

Select here whether automatic time-shifting is enabled or disabled. If this is set to “On”, the receiver automatically (in the background) starts recording the programme you are viewing as soon as you switch to the channel.

Then, in manual record mode, you can decide whether to record the programme from the current time or from the time you switched to the channel. The advantage of this is that you do not lose the part of the programme you were watching before you decided to record it! When you select “Off” you can only record the programme as from the point you press Record, and lose the portion of the programme before you started recording. For this see also the chapters “Basic operation”, “Automatic Timeshift”.

Timeshift Buffer Size

Select here the size of the background buffer the receiver makes available for time-shift recording. You have the following selection options:

-	5 GB	(sufficient for approx. 1 hour of HDTV recording)
-	10 GB	(sufficient for approx. 2 hours of HDTV recording)
-	15 GB	(sufficient for approx. 3 hours of HDTV recording) or
-	20 GB	(sufficient for approx. 4 hours of HDTV recording)
		The value selected for the timeshift memory automatically reduces the available memory capacity
		for recordings in the recording archive.

Default Record Duration

Select here the default record duration. If the channel information gives no start time and end time for the programme that is to be recorded, the receiver will automatically use the default record duration that is set here. You can choose between 30 minutes and 3 hours, in 30 minute increments.

120