Main menu - Settings
Frequency
Select here the desired transponder. By pressing
the button at this point you can view a list of the transponders saved in the receiver for this satellite.
Use the buttons to select the transponder you want
and confirm your selection with the button.
Symbol Rate
The symbol rate is positively assigned to each saved transponder, and cannot be changed.
Polarization
The polarization is positively assigned to each saved transponder, and cannot be changed.
Longitude
A fixed longitude is assigned to each saved satellite, and cannot be changed.
Create new satellite
By pressing the button you can call up the input screen to save a new satellite. The following display appears:
Satellite Name:
Use the keypad to enter a name for the new satellite. Alphanumeric characters are input as described in “Operating instructions”, “Alphanumeric entries”.
Enter Longitude:
Then switch to the “Longitude” input field and use the
numeric keypad to enter the desired longitude. Use the buttons to choose between E (East) and W (West).
Band:
Use the buttons to select the correct band for the new satellite.
When all settings have been made, press the button to save the new satellite.
123
