Tuner Configuration

DiSEqC™1.0

The individual items are selected using the  buttons. If you require to access submenus, they can be called up using the button. Changes to the current settings can be made using the buttons or the numeric keypad.

Tuner 1

Select “Tuner 1” field and press the button to allow you to make the settings for the first tuner.

The following display appears:

Number of Satellites

State here the number of satellites received in the signal at tuner 1. A maximum of four satellites can be received at one tuner.

Satellite 1

Select “Satellite 1:***” field and press the button to allow you to make the settings/selection for the first satellite.

The following display appears:

Satellite and position:

Select here the satellite you desire from the available

satellites. By pressing the button at this point you can view a list of the satellites saved in the receiver.

Use the buttons to select the satellite you want and

confirm your selection with the button.

139

Page 139
Image 139
Kathrein UFS 922 sw, UFS 922 si manual DiSEqC1.0, Tuner, Number of Satellites