Kathrein UFS 922 sw, UFS 922 si manual Simple LNB, Tuner

Tuner Configuration

Simple LNB

The individual items are selected using the  buttons. If you require to access submenus, they can be called up using the button. Changes to the current settings can be made using the buttons or the numeric keypad.

Tuner 1

Select “Tuner 1” field and press the  button to allow you to make the settings for the first tuner.

Satellite and position:

Select here the satellite you desire from the available

satellites. By pressing the  button at this point you can view a list of the satellites saved in the receiver.

Use the  buttons to select the satellite you want and

confirm your selection with the button.

LNB Setting:

Select the “LNB Setting” field. If your reception system does not have a Universal LNB, press the  button so that you can make the settings for the LNB.

You can choose from the following LNB types:

-Universal

-Simple

-User-defined

If your LNB is neither a Universal nor a Simple LNB, select the setting “User-defined”. The setting “User-defined” means you must manually set the frequency ranges that are configured for your LNB. Select the frequency range to be changed

and set the values that are correct for your LNB, using the  buttons or the numeric keypad. When you have completed all settings, press the button.

Test-Transponder:

Select the “Test Transponder” field. Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar.

When you have completed all settings, press the button.

149