Recording archive (play back/edit recordings)
Copying to USB data carrier
The connected USB data carrier must be “FAT/FAT 32” formatted.
Successful USB data carrier initialisation is indicated by the “USB” and “HDD” symbols on the front display. If both symbols are lit, the data carrier can be used.
Use the buttons to select “Copy to USB Device” and confirm your selection with the button. The following display appears (example):
Use the buttons to select the desired storage location here.
A USB storage medium or partition with insufficient memory capacity is marked in red (see example screenshot on right). It is not possible to copy the selected recording(s) to this storage location. Select a storage location with sufficient space (displayed in black).
Then press the button to start the copying operation. The progress of the copying is shown in the channel information (called up using the button from the TV picture), see example screenshot below.
95