Kathrein UFS 922 sw TV Settings, For output of the TV picture via the Hdmi output, Show 43 Event

TV Settings

After calling up the menu you will see the following display (depending on the selected signal output):

For output of the TV picture via the HDMI output:

Main menu - Settings

For output of the TV picture via the Scart-TV output:

The individual items are selected using the  buttons. Changes to the current settings can be made using the

buttons. When doing this, refer to the operating instructions for your TV set!

Video Output Via

Select here the connection on the receiver to which you have connected your TV set. Either

HDMI/YUV (see also note on the next page)	or	Scart
HDMI/YUV Resolution		TV aspect ratio

Here you can select the picture resolution that will be sent to the TV set. Either

-1080i (resolution 1920 x 1080, half-screen images)

-576p (resolution 720 x 576, full-screen images)

-720p (resolution 1280 x 720, full-screen images) or

Select here the picture format for your TV set. Either

-4:3 or

-16:9

- Automatic

Show 4:3 Event

Here you can select the type of screen display mode for 4:3 broadcasts on a 16:9 TV set. Either

-Normal (Pillar Box)

-Stretched (Full Screen) or

-Zoomed in (Pan & Scan)

Picture format

Select here the type of screen display, depending on the setting of your TV format. Either

-Pan & Scan (only for “4:3”)

-Letterbox (only for “4:3”)

-Automatic (only for “16:9”) or

-Always 16:9 (only for “16:9”)

111