Kathrein UFS 922 si, UFS 922 sw manual Settings for satellites 2, 3, Settings for tuner

Tuner Configuration

LNB Setting:

Select the “LNB Setting” field. If your reception system

does not have a Universal LNB, press the  button so that you can make the settings for the LNB.

You can choose from the following LNB types:

-Universal

-Simple

-User-defined

If your LNB is neither a Universal nor a Simple LNB, select the setting “User-defined”. The setting “User-defined” means you must manually set the frequency ranges that are configured for your LNB. Select the frequency range to be

changed and set the values that are correct for your LNB, using the  buttons or the numeric keypad. When you have completed all settings, press the button.

DiSEqC™ Repeat:

Select the “DiSEqC™ Repeat” field. Set the “DiSEqC™ command” repeat rate here to match the configuration of your reception system. You can choose between: “Off” or a unit step in the range “1” to “3”.

Test-Transponder:

Select the “Test-Transponder” field. Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar.

When you have completed all settings, press the button.

Settings for satellites 2, 3 and 4

If you want/are able to receive more than one satellite at the first tuner input, make the settings for the other satellites in the same way as described for the first satellite.

When you have completed the settings for all the satellite, press the button.

Settings for tuner 2

If you selected the “Separated” connection type for the second tuner you must now make the settings for the second tuner in the same way as you did for the first tuner.

140