Tuner Configuration

Motorized Antenna (DiSEqC™1.3)

Motor Control

Select the control type “DiSEqC™1.3”. For this, refer to the documentation for your motorized antenna.

My Longitude

Select the “My Longitude” field and use the numeric keypad to input your actual longitude.

My Latitude

Select the “My Latitude” field and use the numeric keypad to input your current latitude.

Go to Null Position

Select the “Go to Null Position” field. Press the button to instruct the turntable to move to its null position.

Set Borders

Select the “Set Borders” field. In this menu you can set the limits for your turntable. This is particularly necessary if the turntable has only a restricted range in which it can turn before striking an obstruction (such as a wall or tree).

Press the button. The following display appears:

The following buttons allow you to control the movement of the turntable:

Start slow rotation to the West

Rotate to the West step by step

Stop the current movement

Rotate to the East step by step

Start slow rotation to the East

Once you have reached the desired East/West limit, switch to the respective field “Set current position for “****” border” and press the button to confirm.

If you subsequently want to delete the Set Borders, switch to the “Reset border positions” field and press the button to confirm deletion of the limits. You can now set new limits. Once you have set all the limits, press the button.

147

Page 147
Image 147
Kathrein UFS 922 sw, UFS 922 si manual Motorized Antenna DiSEqC1.3, Motor Control