Connection and setup

Network Search

Use the  buttons (On/Off) to select whether a network search should be performed. If you set the network search to “Off”, only the factory default transponders for the satellite(s) you previously selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the transponder network enables additional transponders that have not yet been stored to be located. They are then stored and searched for new channels in the same way as the existing transponders.

When you have completed all settings, press the (green) button. The following displays appear (example):

TV channels

 

Radio channels

found

 

found

 

 

 

During the search you will see the following display (example):

New channels found are identified by the suffix “NEW” (see screenshot example, right).

Note:

You can cancel the search at any time by pressing the

button.

After completion of the search, you will see the following display (example):

Press the button. The new channels founded are added at the end of the existing complete list.

42

Page 42
Image 42
Kathrein UFS 922 si, UFS 922 sw manual Network Search, TV channels Radio channels Found