Recording archive (play back/edit recordings)

Cut

Before cutting a recording for the first time you should make a copy of the recording to be cut, so that if you make a mistake you can recover the recording. See “Copy” in the relevant paragraph of this chapter for details.

The following display appears (example):

Now use the cursor () buttons, the  buttons or the button to select the desired start of the section to be

cut from the recording, and then confirm by pressing the button. The following display appears (example):

Now use the cursor () buttons, the  buttons or the button to select the desired end of the section to be

cut from the recording, and then confirm by pressing the button. The following display appears (example):

Use the  buttons to select “Cut recording” and

confirm your selection with the button. The receiver will then commence the cutting operation for the section that you have selected.

On completion of the cutting operation you can cut another section from the selected recording in the same way, or press the button or the button to revert to the recording archive.

92

Page 92
Image 92
Kathrein UFS 922 si, UFS 922 sw manual Cut