Connection and setup
OneCable System - UAS 481
The individual items are selected using the buttons. If you require to access submenus, they can be called up using the button. Changes to the current settings can be made using the buttons or the numeric keypad.
Press the (green) button.
The following display appears:
Select Satellites - Tuner 1
Here, you can select the satellite included in the signal on tuner 1. Use the buttons to select the satellite you want and confirm your selection with the button.
When you have selected the satellite you want, press the
(green) button.
The following display appears:
The individual items are selected using the buttons. Changes to the current settings can be made using
the buttons or the numeric keypad.
Refer to the documentation supplied with the UAS 481 for the settings for “Tuner 1” and “Tuner 2”. No frequency can be used by more than one receiver. The receivers would interfere with each other. Do not assign the same frequencies/channels to tuner 1 and tuner 2.
36
