Simrad AP26 and AP27 Autopilots
Display readout | Probable fault | Recommended action | |
Com. failure with | Faulty Autopilot | 1. | Check Robnet2 connectors and |
ACXX | Computer or poor |
| cable. |
| Robnet2 cable | 2. | Replace Autopilot Computer Main |
| connections from | ||
|
| PCB. | |
| the same. |
| |
|
|
| |
Low supply | Mains voltage less | 1. | Verify in the System Data Menu |
voltage | than 9 Volts | 2. | Switch autopilot off, charge |
|
| ||
|
|
| batteries |
|
| 3. | Check/repair battery charger |
High supply | AC20/AC40 Mains | 1. | Verify in the System Data Menu |
voltage | exceeds 44 V | 2. | Switch the autopilot off |
| AC10 Mains | ||
| 3. | Check / repair battery charger | |
| exceeds 29 V | ||
122 | 20221586B |
