Simrad AP27 manual Autopilot Control Unit, Part of AP26 PCB

Maintenance

Autopilot Control Unit

You will need a special kit for a PC to perform the programming of the Control Unit. Order the following from Simrad:

Programming kit P/N 22088595. Instructions are included.

Software download connector

Figure 5-2 Part of AP26 PCB

Software download connector

Figure 5-3 Part of AP27 PCB

Remove the cables and unscrew the screws that secure the back cover. Apply a firm pull with your fingers to pull the back cover loose from the connector pins. Then you have access to the software download connector.

20221586B 117