Simrad AP26, AP27 manual Compass, Navigation, Position, Wind Angle, Wind Calculated, Water Speed

Installation

Notes !

1.Simrad products will be identified by the product name provided the data is available on SimNet. If data is provided via an NMEA0183 port on the autopilot computer, the display will read NMEA-1 or NMEA-2. NMEA2000 products will have a special ID.

2.See note on page 74 and note 3 below.

3.In the event the SimNet is not powered on, sources supplying data to SimNet are not on or malfunctioning, or there is no SimNet installed, it is possible to use any control unit in the system to select NMEA sources. The source select displays are then available on all control units.

Compass

Select the compass to be used if more than one compass is connected.

Navigation

Select the source for navigational data.

Position

Select the source for position data.

Wind Angle

Select the source for Wind Angle.

Wind Calculated

Select the source for Calculated Wind data for the Simrad group. AP uses internal sources irrespective of the selected source.

Water Speed

Select the source for water speed (normally the same as the source providing Log data).

Water temperature

Select the source for water temperature (normally the same as the source providing depth data).

20221586B 43