Simrad AP26 User Set-up Menu, Alternating Course Knob Icon, Standby Mode, Backlight, Contrast

Installation

2.22User Set-up Menu

In the AP26 and AP27, all modes except NFU and FU have a complemental User Set-up menu. You can easily access the set- up menu by a quick double press on the NAV/WIND/SETUP button.

Quick double press	Scroll through the menu	Use the course knob to
		change a value or a setting
to access

Alternating Course Knob Icon

When the course knob is used in the User Set-up menu, an icon will alternate with the mode index to tell that no course changes can be made unless you press the mode button.

The user set-up menu times out 30 seconds after the last operation in the menu.

STANDBY Mode

Backlight

The backlight of the display and buttons may be adjusted to 10 levels (10 = brightest). The setting is stored when the system is turned off. Adjustment is local to the control unit you adjust or synchronized with other units in the Simrad Group (page 110).

Contrast

The contrast of the display may be adjusted to 10 levels (10 = highest contrast). The setting is stored when the system is turned off.

Adjustment is local to the control unit you adjust. At high temperatures, not all levels are available due to automatic temperature compensation.

20221586B 39