Maintenance
•The Installation Settings are global except for display units and language, enabling settings to be distributed to all control units in the system.
•The Seatrial settings are dependent on successful completion of the Dockside settings.
4.3Installation Menu
The Installation Menu is presented on the autopilot display by pressing and holding the NAV/WIND/SETUP button for 5 seconds.
Note ! The INSTALLATION MENU is different from the USER SETUP MENU. Refer to the flow diagram on the next page for a pictorial view of the Installation Menu.
Navigate through the Installation Menu as follows:
•Answer YES to a question by rotating the course knob clockwise.
•Answer NO to a question or proceed to the next menu item by pressing the STBD button.
•Return to the previous menu item by pressing the PORT button.
•Change the selected item by rotating the course knob in either direction.
•Exit the Installation Menu by pressing STBY, AUTO, or NAV/WIND buttons.
When using the Installation Menu, refer to the diagram "Installation Menu Flow Chart" on next page.
Note ! You may proceed through all items in the installation menu by continuing pressing the STBD button.
20221586B | 85 |
