![](/images/new-backgrounds/1303311/303311139x1.webp)
Simrad AP26 and AP27 Autopilots
3.15R3000X Remote Control installation
R3000X should be mounted in the supplied bracket that can be fixed by four mounting screws. The unit is weather proof and can be mounted outdoor.
R3000X | AUTOPILOT COMPUTER | |||
REMOTE CONTROL | POWER PCB |
|
|
|
|
|
|
| |
| T B 1 T B 2 TB3 TB4 TB5 |
|
|
|
| TB6 | TB7 |
| T B 8 |
| Lamp |
|
| |
| Port Stbd | Gnd |
| |
| Yel | G n R ed | Blu |
|
| R E M O T E |
|
|
Figure 3-15 R3000X connection
3.16JS10 Joystick
Refer to separate installation procedure for JS10 Joystick.
3.17S35 NFU Lever installation
The unit is mounted to a bulkhead or panel by two screws from the front. The cable is connected to the autopilot computer according to Figure
68 | 20221586B |