Simrad AP27, AP26 manual Exchange of software programme, Autopilot Computer

Simrad AP26 and AP27 Autopilots

5.6Exchange of software programme

Autopilot Computer

Autopilot

Computer

EPROM

Figure 5-1 AC10/AC20/AC40 Main PC-Board

• Remove the EPROM from the socket by means of the special extraction tool (p/n 44139806).

• Insert the tool by pressing the two grip pins down into the two slots in the corners of the socket.

• Squeeze the tool and pull out the EPROM.

•The identification tag indicates:

-Name of unit

-Part number

-Software version

Caution!

When inserting a new EPROM, make sure the cut-off corner matches with the one in the socket. Press it gently into the socket.

EPROM for AC10, AC20 and AC40 Autopilot Computers: P/N 22088462

After change of EPROM, perform a master reset as described on page 112.

Cut-off

corner Identification tag

Slots

116 20221586B