Simrad AP27, AP26 manual Instrument Select, Source Select, Auto source update, Manual select

Simrad AP26 and AP27 Autopilots

Instrument Select

Select the contents of the instrument page(s) to be

available under the

DODGE/TURN/INFO button (page 46). Step through the list of instrument pages by using the PORT or STBD button.

Select the wanted information by rotating the course knob to fill the squares.

Source Select

Provides you with automatic or manual selection of interfaced data sources for heading (Compass), Navigation, Position, Wind Angle, Calculated Wind, Water speed, Water temperature, Distance log (not displayed on AP26 and AP27) and Depth.

Wind-C (calculated) is a common term for true wind and wind direction.

Auto source update

Is used for automatically update of sources if the interfaced units have been removed/added or switched on/off.

Select Auto source update by rotating the course knob. Make sure all interfaced units are powered on

The autopilot will search for new connected sources, and replace sources no longer available. “SEARCHING” is flashing as long as the autopilot is searching. When the automatic update is finished, the display will read “DONE”.

Press the STBD button to leave the User setup.

Manual select

Step through the list of sources using the PORT or STBD button. Select wanted source by rotating the course knob.

– – indicates that no source is supplying the data available.

42 20221586B