Chapter 7. Status Polling

The following syntax is the response for a Job 3 request.

Syntax {J,"Status1 A,B","Status2

A,B,C,D,E","FMT-1","BCH-2"}

"Status1 A,B" Status1 A contains the field number, in the format or batch, where an error was found. If the error is not in the format or batch, a "0" is returned.

Status1 B contains an error number, which represents the actual printer error. The error numbers can be found in Chapter 9, "Errors."

Example {J,"2,612",}

2 is the field number where an error was found. 612 is the error number, indicating that data is missing or does not match the format definition for that field.

n Error numbers found in Status1 B, always have a value equal to or greater than 500. These are considered very serious errors.

"Status2 A,B,C,D,E" contains the packet type, field type, field

 

number, parameter, and error number.

Status2

represents the MPCLII packet that the

A- Packet Type

error occurred on. The packet could be

 

Format (F), Batch (B), Check Digit (A),

 

Graphic (G), or Font (W).

Status2

represents the MPCLII field that the error

B- Field Type

occurred on. If the packet has no fields,

 

Status2 A will be replicated. If the error

 

occurs before the field is identified a

 

question mark is sent. Since the batch

 

data is variable, a D is sent to indicate

 

data.

7-9

Page 111
Image 111
Paxar TCMPCL2PR manual Syntax J,Status1 A,B,Status2 C,D,E,FMT-1,BCH-2, Example J,2,612, Packet Type