Chapter 4. Defining Fields

Options for the Scalable Font:

AOpaque, Normal, Black, Bold

B Opaque, Normal, Black, Normal

E Opaque, Italics, Black, Bold

F Opaque, Italics, Black, Normal

N Transparent, Normal, Black, Bold

O Transparent, Normal, Black, Normal

S Transparent, Italics, Black, Bold

T Transparent, Italics, Black, Normal

NOTE: Solid black print cannot exceed 20% (for the 9490 printer) or 30% (for the 9494/9446/1460 printers) on any given square inch of the label.

There are two types of field color overlay attributes:

Transparent

The overlay field (text or constant text) does

 

not block out (or "erase") existing fields.

Opaque

The overlay field blocks out (or "erases")

 

existing fields.

Field placement in the packet is an important consideration when using field color attributes. If a line field is defined before the overlay (text or constant text) field, the line field is blocked out by the overlay field, depending on the overlay field’s color attribute. If a line field is defined after the overlay field, the line field is not blocked out by the overlay field, regardless of the overlay field’s color attribute.

C9. alignment Alignment of constant text in the field. Options:

LAlign on left side of field.

C Center text within field (for monospaced fonts only)

R Align on right side of field (for monospaced fonts only)

B Align at midpoint of field

E Align at end of field.

Use L, B, or E for any font.

C10. char rot Character rotation. Options:

0Top of character points to top of field (Use for scalable font)

1Top of character points to left of field

2Top of character points to bottom of field

3 Top of character points to right of field

4-17

Page 69
Image 69
Paxar TCMPCL2PR manual Defining Fields