TROUBLESHOOTING
SYMPTOMS | CAUSES | REMEDIES |
|
|
|
The water pump will not start | The motor thermic protection is open | Check the mains voltage (+/- 5% |
|
| tolerance). Check the phases |
|
| in the plug are connected well. |
|
|
|
The machine is not going in | The | Replace the valve or the gasket |
TOTAL STOP mode (unit in |
| and check the pressure valve |
| body wear. | |
| Leakage from the water system | Eliminate the leaks |
| of the gun |
|
|
|
|
The water pump does not reach | Nozzle worn | Replace the nozzle |
maximum pressure |
|
|
| Pressure ball or adjustment housing | Replace the faulty part |
| worn or spring broken |
|
| Pressure valve gaskets worn | Replace the valve gaskets |
| Pistons seal gasket worn | Replace the gaskets |
| Nozzle holding head in position | Turn the head on high pressure |
| low pressure |
|
|
|
|
Strong vibrations on the water pump | Water supply insufficient | Check the water supply flow and |
|
| the relative pressure (2÷10) |
|
| Check the water filter and clean |
|
| it if necessary |
|
| Prime the pump without the lance |
| Alien matter under a check valve | Check the valves, clean and |
|
| reassemble |
|
|
|
The burner will not start | Diesel filter blocked | Clean the filter |
| Diesel nozzle blocked | Clean the filter |
| Worn or broken electrodes | Replace the electrodes |
| The pressure switch remains open | Replace the pressure switch |
|
|
|
Anormal noise of Diesel pump | Low diesel | Fill diesel tank or work on cold water |
|
|
|
No detergent suction | High viscosity of the employed | Further dilute the detergent |
| detergent |
|
| Detergent filter blocked | Clean the filter |
- 11 -