Open the LCD monitor.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 29) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the access lamp has gone off.

Access lamp [ACCESS] A

When this unit is accessing the SD card or built-in memory, the access lamp lights up.

1

2 Open the SD card cover and insert (remove) the SD card into (from) the card slot.

Face the label side B in the direction shown in the illustration and press it straight in as far as it will go.

Press the centre of the SD card and then pull it straight out.

3 Securely close the SD card cover.

Do not touch the terminals on the back of the SD card.

16

VQT2L26 (ENG)

Page 16
Image 16
Panasonic SDR-S50, SDR-T50, SDR-H85 Inserting/removing an SD card, Access lamp Access a, Securely close the SD card cover