Chicago Electric 91511 operating instructions Symbology, Figure B

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size.

(See Figure B.)

6.If you are using an extension cord outdoors, make sure it is marked with the suf- fix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified elec- trician before using it.

8.Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

FIGURE B

SYMBOLOGY

		Double Insulated
		Canadian Standards
		Association
		Underwriters
	V ~	Laboratories, Inc.
		Volts Alternating
		Current
	A	Amperes
FIGURE C	no	No Load Revolutions
	xxxx/min.	Per Minute (RPM)

SKU 91511 PAGE 7