13.Before using the Wet Tile Saw, make sure the Saw Blade is properly mounted on the Saw Spindle. Make sure the Saw Blade is balanced, and is not cracked or bent.
14.The Saw Blade will become hot while cutting. Allow the Saw Blade to completely cool before touching.
15.Allow the Saw Blade to spin up to full speed before feeding a workpiece into it. When turning off the Saw, allow the Saw Blade to spin down and stop on its own. Do not press against the Saw Blade to stop it.
16.Do not force the workpiece into the Saw Blade when cutting. Apply moder- ate pressure, allowing the Saw Blade to cut without being forced.
17.Turn off the Wet Tile Saw and allow the Saw Blade to stop on its own if the Saw Blade is to be backed out of an uncompleted cut.
18.Never attempt to remove material stuck in the moving parts of the Wet Tile Saw while it is plugged in and running.
19.When cutting a large workpiece, make sure its entire length is properly supported. If necessary, use a roller stand (not included) with larger workpieces.
20.Never stand on the Wet Tile Saw. Serious injury could result if the Wet Tile Saw is tipped or if the rotating Saw Blade is accidently contacted.
21.Industrial applications must follow OSHA requirements.
22.For your safety: In extreme working conditions, sensors in the Wet Tile Saw will automatically switch off the Motor to prevent overheating. In this event, turn the Power Switch to its “OFF” position. Wait five minutes or until the Motor has cooled. Depress the Circuit Breaker. Then, turn the Power Switch to its “ON” position to resume cutting.
23.Always turn off the Wet Tile Saw and unplug the Power Cord from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures.
24.Use the right tool or attachment for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool or attachment. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product, and do not use this product for a purpose for which it was not in- tended.
SKU 91511 | PAGE 9 |
