Onkyo TX-NR1007 Advanced Setup—Continued, ISF Mode, Day: Setting when a room is bright, Video

Advanced Setup—Continued

ISF Mode	Custom: User setting (All items can be freely set.)
	Day: Setting when a room is bright.
	Night: Setting when a room is dark.

The receiver has been designed to incorporate setup and calibration standards established by the Imaging Sci- ence Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be performed by an ISF Certified installation technician.

Picture Mode*1	Video:	Does not process in either “3:2” or “2:2” (default).
	Auto:	Adjusts to the picture source, automatically selecting “Picture Mode”.
	3:2:	Selected when the picture source is movie film, etc.
	2:2:	Selected when the picture source is computer graphics, animation, etc.

The AV receiver will adjust to the picture source, processing in either “3:2” or “2:2” (Picture Mode). It auto- matically converts the source to the appropriate progressive signal and reproduces the natural quality of the original picture.

When the “Picture Mode” setting is set to “Auto”, the AV receiver automatically detects the picture source and in either “3:2” or “2:2”. However, there may be times when you will get a better picture by setting “Picture Mode” yourself.

Note:

If the “Game Mode” setting is set to “On”, this setting is fixed at “Video”.

Edge Enhancement*1 0 (default) to +10

With this setting you can adjust the sharpness of edges in the picture. “0” is the softest. “+10” is the sharpest.

Noise Reduction*1	Off: Noise reduction off.
	Low: Low noise reduction (default).
	Mid: Medium noise reduction.
	High: High noise reduction.

With this setting, you can reduce noise appearing on the screen.

Note:

If the “Game Mode” setting is set to “On”, this setting is fixed at “Off”.

Resolution*1	Through: Select this to pass video through the AV receiver at the same resolution
	and with no conversion (default).
	Auto: Select this to have the AV receiver automatically convert video at
	resolutions not supported by your TV. When the “Monitor Out” is set to
	“Analog”, this setting will be changed to “Through”.
	480p (480/576p):
	Select this for 480p or 576p output and video conversion as necessary.
	720p: Select this for 720p output and video conversion as necessary.
	1080i: Select this for 1080i output and video conversion as necessary.
	1080p: Select this for 1080p output and video conversion as necessary. When
	the “Monitor Out” is set to “Analog”, this setting will be changed to
	“1080i”.

You can specify the output resolution for the HDMI outputs and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV.

Available only when “Source” has been selected in the “Resolution” of the “Monitor Out” setting (page 48).

102