Onkyo TX-NR1007 Analog Audio Input Setup, Tons to select 5. Analog Audio, Analog Audio Input menu

First Time Setup—Continued

Analog Audio Input Setup

If you connect a component to the AV receiver’s analog multichannel input, you must assign that input to an input selector. For example, if you connect your DVD/ BD player to the MULTI CH input, you must assign it to the DVD/BD input selector.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1.Monitor Out

2.HDMI Input

3. Component Video Input

4. Digital Audio Input

5. Analog Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “5. Analog Audio
	Input”, and then press [ENTER].
	The “Analog Audio Input” menu
	appears.
	1–5.	Analog Audio Input
	Multich	- - - - -
	Subwoofer Input Sensitivity

4 Use the Left and Right [e]/[r]

buttons to select an input selec- tor.

You can assign the multichannel input to the following input selectors: “DVD/ BD”, “VCR/DVR”, “CBL/SAT”, “GAME”, “AUX”, “TV/TAPE”, “CD”, or “PHONO”. If you don’t want to assign the multichannel input, set to “- - - - -”.

5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•To listen to the component connected to the multi- channel input, press the [AUDIO] button and select the “Audio selector” (see page 114).

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

52