Onkyo TX-NR1007 Connecting a TV or Projector, Video Connection, Audio Connection

Connecting the AV receiver—Continued

Connecting a TV or Projector

See “Connecting Components with HDMI” on page 25 for HDMI connection information.

Step 1: Video Connection

Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.

Step 2: Audio Connection

Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from your TV or listen in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use and , or and .)

Connection					AV receiver	Signal flow	TV, projector, etc.
	A	COMPONENT VIDEO MONITOR OUT				⇒	Component video input
			MONITOR OUT S			⇒	S-Video input
	C		MONITOR OUT V			⇒	Composite video input
				TV/TAPE IN L/R		⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 2 (VCR/DVR)				⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1 (GAME)				⇐	Digital optical output

A

b	c	C
		a
When you use connection b ,		B

you need to assign the digital	When you use connection c , you need to
audio input (see page 51).
	assign the digital audio input (see page 51).

Hint!

						TV, projector,
	L		R			etc.
COAXIAL	OPTICAL	AUDIO	S VIDEO	VIDEO	Y	PB PR
OUT	OUT	OUT	IN	IN	COMPONENT VIDEO IN

If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 33 and 35).

30