Onkyo TX-NR1007 instruction manual First Time Setup, Monitor Setup

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

	■ Change “Monitor Out” setting manually
Monitor Setup

If you connect your TV to HDMI OUT MAIN, “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video, S- Video, and component video sources are upconverted* and output.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI output, as well as whether to have the onscreen setup menu output through the HDMI output or through an analog output.

If you connect your TV to the COMPONENT VIDEO MONITOR OUT (not the HDMI output), “Monitor Out” setting is automatically set so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

MONITOR OUT

1	Press the [MONITOR OUT] but-
	ton.
	The current setting is displayed.

2	Press the [MONITOR OUT] button
	repeatedly to select: Analog,
	HDMI Main, HDMI Sub, Both,
	Both(Main) or Both(Sub)
	For details on each item, see step 4 in
	the page 47.

Tips:

•The “Monitor Out” setting can also be set using the [VIDEO] button on the remote controller.

•This setting can also be performed by using Onscreen Setup Menu (see page 47).

Notes:

•See page 27 for charts showing how the “Monitor Out” and “Resolution” (see page 47) settings affect the video signal flow through the AV receiver.

•You can specify the output resolution for the HDMI outputs and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV (see page 47).

44