Onkyo TX-NR1007 105, Miscellaneous Volume/OSD Setup, Select an item, and use the Left and Right

Advanced Setup—Continued

Miscellaneous (Volume/OSD) Setup

This section explains the items on the “Miscellaneous” menu.

1 Press the [RECEIVER] button followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] buttons to select “6. Miscellaneous”, and then press [ENTER].

The “Miscellaneous” menu appears.

6.Miscellaneous

1.Volume Setup

2.OSD Setup

3	Use the Up and Down [q]/[w] buttons to
	select an item, and then press [ENTER].
	The screen for that item appears.
4	Use the Up and Down [q]/[w] buttons to
	select an item, and use the Left and Right
	[e]/[r] buttons to change it.
	The items are explained below.
5	When you’ve finished, press the [SETUP]
	button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Volume Setup

Volume Display	Absolute: Display range is “Min”, 0.5 through 99.5, “Max”.
	Relative: Display range is –QdB, –81.5 dB through +18.0 dB.

With this setting, you can choose how the volume level is displayed.

The absolute value 82 is equivalent to the relative value 0 dB.

Muting Level –QdB (fully muted), –50 dB to –10 dB in 10 dB steps.

This setting determines how much the output is muted when the muting function is used (page 64).

Maximum Volume Off, 50 to 99 (Absolute display)

Off, –32 dB to +17 dB (Relative display)

With this setting, you can limit the maximum volume.

To disable this setting, select “Off”.

Power On Volume	Last, Min, 1 to 99 or Max (Absolute display)
	Last, –QdB, –81 dB to +18 dB (Relative display)

With this preference, you can specify the volume setting to be used each time the AV receiver is turned on. To use the same volume level that was used when the AV receiver was turned off, select “Last”.

The “Power On Volume” cannot be set higher than the “Maximum Volume” setting.

Headphone Level –12 dB to +12 dB

With this preference, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones.

105