EtherTalk setup screen | SNMPsetupscreen |
1Set whether EtherTalk is used.
2Enter the new printer name if you change the printer name used by Chooser.
3Enter the new zone name if you want to move your printer to a different zone.
1Enter the authentic community name and trap community name.
2Enter the IP address for trap notice as “###.###.###.###”. If you do not use traps, enter “0.0.0.0”.
3Enter SysContact, SysName and SysLocation.
4This is the IP packet TTL value. This should not normally be changed.
5Check box if a trap should be issued when an authorization error occurs.
122 | Fast Ethernet 7100e+ |
