Timeout | Using quick setup utility (Windows) |
Polling Time - Set the time for polling the response from the Fast EtherNet (in seconds).
It is possible to set up the Fast EtherNet from a PC running TCP/ IP or IPX/ SPX using the Quick Setup Utility for Windows supplied with the Fast EtherNet.
Timeout - Set the timeout for data transmission between AdminManager and the Fast EtherNet (in seconds).
Retry Time - Set the number of times to retry data transmission between Admin Manager and the Fast EtherNet.
Operatingenvironment
APC with Windows98/95 or Windows NT Server 4.0/ Workstation4.0, running TCP/IP or IPX/SPX (NetWare).
•Operation on any system other than the above cannot be guaranteed.
•This utility cannot be used on a PC which cannot be connected to the network with TCP/IP or IPX/SPX.
•This utility must be used on a PC which is located on the same segment as the printer.
130 | Fast Ethernet 7100e+ |
