Japan Tiger 7100e+ Printing From Macintosh, Confirming the configuration of your printer

Printing From Macintosh

In order to print from Macintosh via an EtherTalk network, it is necessary to set up the Fast EtherNet and the Macintosh.

To print from Macintosh, you need to have a PostScript printer. If your printer does not include PostScript, you cannot use it.

Confirming the configuration of your printer

If you use an EtherTalk network from Macintosh, it is not necessary to change the Fast EtherNet settings.

•The menu printing procedure varies depending on the printer you use. See the User’s Manual supplied with your printer for details.

•For printers whose settings cannot be checked using menu print, see “Checking the Configuration” under “Printing a Test Page” in Chapter 1.

The following description uses OKIPAGE 8c as an example. Print the menu of your printer to confirm the current settings.

1Press ON-LINEto place the printer “Off-line”.

2Hold down Print Menu for 2 seconds or more to select “Print Menu”. Menu printing starts.

3After the completion of menu printing, press ON-LINEto place the printer on-line.

<Example of Menu Print> English

Check that the settings (in bold) are correct.

•If “OKI HSP” of “HOST INTERFACE” in “Common” is set at “DISABLE”, switch “OKI HSP” of “HOST INTERFACE” in Level 1 Menu to “ENABLE”, referring to the User’s Manual of the printer.

•“Zone Name” and ”Object Name” in “EtherTalk status” vary depending on the user environment.(See network administrator.)

User Manual 49