Printing From UNIX
In order to print from a UNIX workstation using TCP/IP, the Fast EtherNet and UNIX workstations must be configured.
Configuring the IP address in the Fast EtherNet
The first step is to configure the Fast EtherNet with an IP address, subnet mask and gateway address. This can be done from the UNIX workstation.
·To change the configuration of the Fast EtherNet, you must log into the card and username”root”, the initial value of the “root” user password is <none>.
·If you type in a wrong IP address, subnet mask or gateway, the network may go down or other severe damage may occur. Please set the configuration only after consulting your network manager.
In the following explanation, Sun Solaris2.4 is used as an example. The method of configuring each command etc. may differ from one workstation to another. Please refer to the manual of the UNIX workstation used.
English
User Manual | 53 |
