TCP/IP setup screen | NetWaresetupscreen |
English
1Set whether TCP/IP is used.
2Enter the IP Address in the format: “###.###.###.###”.
3Check the boxes if the address is to be acquired from RARP or DHCP/ BOOTP.
4Enter the subnet mask in the format: “###.###.###.###”.
5Enter the gateway address in the format: “###.###.###.###”. If you do not use a router or gateway, enter “0.0.0.0”.
6Enter the ROOT Password.
Enter the printer name, frame type, operating mode, NetWare port name, etc.
User Manual | 121 |
