7If the settings are correct, click [Yes]. The settings are transmitted to Fast EtherNet. At this point, however, Fast EtherNet is still operating according to the previous settings.
8Click [Yes] to reset the Fast EtherNet.
•If you select [No], the new settings will take effect after the printer is power cycled.
•You may have to power cycle (switch off, then on again) the printer depending on the model.
9When [Current Status] changes to [Waiting for Print Job], the printer is ready.
If the status does not change to [Waiting for Print Job], set the file server and Fast EtherNet again from the beginning.
<Print Server Status>
Printer: P1.SOFT22.ENG7
Type•: Manual Load (Remote), LPT1
Current Status: Waiting for Print Job
Check the status of printer connection
94 | Fast Ethernet 7100e+ |
