3.Configure the transfer mode.
There are two types of transfer mode, the “BINARY mode” in which the file contents is output as it is and the “ASCII mode” which converts the LF code to the CR+LF code. If a binary file, converted by the printer driver, is transferred, the transfer mode has to be the “BINARY mode”.
Example: Changing the transfer mode to the BINARY mode and verifying the current mode.
ftp> type binary
200 Type set to I. ftp> type
Using binary mode to transfer files. ftp>
4. Using the put command, transfer the print data to the Fast | English |
| |
EtherNet. |
|
There are two modes of file transfer using the put command. |
|
Example: Transferring the print data “test.prn”. |
|
ftp> put test.prn
Example: Transferring the print data specified by an absolute path “/users/tes/test.prn”.
ftp> put /users/test/test.prn /lp
If the print data is specified by an absolute path, specify the transfer logical directory. There is no need to switch directories with the cd command.
5.Log out from the Fast EtherNet using the quit command. ftp> quit
User Manual | 69 |
