5Follow the instructions on the screen to configure the Fast EtherNet.
6Check the setting details. If the settings are correct, click [Run]. The new settings will be transmitted to the Fast EtherNet.
At this point, the Fast EtherNet is still operating with the previous settings.
For creating NetWare queues and so on, it is necessary to add NetWare Client32 or IntranetWare Client to the PC.
7 Click [Finish] to make the new settings take effect.
You may need to switch the printer, depending on the model, off and then back on again.
132 | Fast Ethernet 7100e+ |
