Japan Tiger 7100e+ user manual Using setup utility Macintosh, 133

Using setup utility (Macintosh) Setting up and using the utility

English

It is possible to set up the Fast EtherNet from a Macintosh running TCP/IP, using the Setup Utility for Macintosh that comes with the Fast EtherNet.

Operatingenvironment

A Macintosh using System 7.1.2 or later, running TCP/IP.

Please have the “Fast EtherNet CD-ROM” ready. The following procedure uses MacOS8.5 as an example.

1Insert the “Fast EtherNet CDROM” into the Macintosh. Double-click [Setup Utility] in [Mac] - [ENGLISH] folder.

•This Setup Utility does not operate on a Macintosh with an operating system earlier than System 7.1.2.

•TCP/IP is required also for Macintosh. Select [TCP/ IP] in Control Panels to set each address. Instead of [TCP/IP], there may be [MacTCP] in Control Panels, depending on the OS version. For details, see your Macintosh manual.

It may also be copied onto the Macintosh hard disk and double-clicking to start it up.

2Click [OK]. After searching for Fast EtherNets, a result list will be displayed.

User Manual 133