ACCUSPLIT® EAGLE™ 1690
MULTI-FUNCTION PEDOMETER
OPERATING INSTRUCTIONS
Congratulations on taking the first step to wellness with your purchase of an ACCUSPLIT pedometer.
It’s easy to set up your new pedometer.
Just follow the steps below, and start walking!
SETTING UP YOUR PEDOMETER
To record your distance and calories accurately, you will need to set your stride length and body weight.
CHOOSING A MEASUREMENT SYSTEM
This unit is initially set to use English measurement units (Miles and Pounds). To change the unit back and forth between English and Metric units (Kilometers and Kilograms), press the green RESET button for 5 seconds.
Finding Your Stride Length:Your stride length is the length of one of your steps, measured from “toe to toe.”To measure, walk 10 steps with your normal stride and measure theTOTAL DISTANCE from the toe of your starting step to the toe of your 10th step (see diagram below). Divide theTOTAL DISTANCE by
DISPLAY MODES
Press the yellow MODE button to cycle through:
•STEP: STEP mode shows your step count since last reset, up to 200,000 steps.
•DIST: DISTANCE mode shows distance walked or jogged since last reset, in miles or kilometers.
•CAL: CALORIE mode shows calories burned through step activity since last reset.
•
: ACTIVITYTIMER MODE shows total activity time in minutes and seconds then hours and minutes since last reset.The timer runs automati- cally whenever steps are being recorded.
•
: CLOCK mode shows time of day.
•SCAN mode: Loops through each display mode, briefly showing step count, then distance, then calories.
10.This is your stride length. Example: If you walk 22 feet, your stride length is 2.2 feet.
Setting Your Stride Length: Press the yellow MODE button until arrow on bottom of display points to “DIST.” Press the dark blue SET button once to enter setting mode. Display will shift to show stride (for example, “F 1.95” means stride is set to 1.95 feet). Press the dark blue SET button(+) to increase stride length. Press the green RESET
Setting Your Weight: Press the yellow MODE button until arrow on bottom of display points to “CAL.” Press the dark blue SET button once to enter setting mode. Display will shift to show
| ACCUSPLIT | MY |
|
| T | 627 I | |
| EAGLE | CALORIE™ | 1690 |
Dark Blue: | S |
|
|
SET | T |
|
|
| E |
|
|
Green: | + – |
|
|
E |
|
| |
RESET | R |
|
|
E |
|
| |
| S |
|
|
TW15MG STEP DIST CAL
Current mode arrow indicator
Aqua:
CLOCK
(momentary)
SCAN Cream:
SCAN
(toggle on/off)
Yellow:
MODE
MODE
weight in pounds. For example, “L 165” means weight is set to 165 lbs. Press the dark blue SET button(+) to increase weight setting. Press the green RESET
Setting the Clock: Press the yellow MODE button until the arrow on the bottom of the display points to the clock icon 
. Press the dark blue SET button to enter clock setting mode (clock readout will flash). Press the green RESET button to advance Hours. Press the dark blue SET button to advance Minutes. Press the aqua CLOCK 
button to shift between 12 and 24 hour mode. (“H” will show in display for 24 hour mode.) Press the yellow MODE button to exit clock setting mode, or wait a few seconds for pedometer to automatically exit clock setting mode.
WEARING YOUR PEDOMETER
While gently holding the belt clip open, slide the pedometer onto your belt or the top edge of your pants or skirt. It should fit snugly and level, above one knee.
Note:The pedometer should be as vertical as possible. Walkers with larger stomachs may find it helpful to wear the pedometer farther back on the body, toward one hip.
The cover must be closed for the pedometer to work.To avoid losing or dropping your pedometer, use the included leash and clip to fasten the pedometer securely to your clothing.
Eat Right! Walk More! Live Well! The ACCUSPLIT Lifestyle
10 steps
ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA
