Using SNMP | Fast EtherNet settings |
The Fast EtherNet is equipped with an SNMP agent which runs on UDP. The printer can be controlled using an SNMP Manager. The Fast EtherNet supports SNMPv1,
The default values for SNMP settings are as follows:
Items | Value |
Authentic Community Name | Public |
Trap Community Name | Public |
Trap IP Address | 0.0.0.0 |
SysContact | None |
SysName | None |
SysLocation | None |
TTL Value (IP packet survival time) | 255 |
Authentic Error Trap | 2(disabled) |
|
|
The default values for printer trap settings are as follows.
Items | Value |
Printer Trap Notice | DISABLE |
Trap Type | LOCAL |
Address (UDP) | 0.0.0.0 |
Address (IPX) | 00000000:000000000000 |
|
|
The Fast EtherNet parameters and their values are described bellow.
Some functions may not be used, depending on your printer type.
The settings in Italics indicates Fast EtherNet default settings
IItems | Function | Setup Value | |
TCP/IP | otocol is used for Ethernet Board. |
| |
TCP/IP protocol | Set TCP/IP Protocol for Ethernet Board. | ENABLE : To use thefunction. | |
|
| DISABLE: Not to use the | |
|
| function. | |
|
|
| |
IP address | Set IP Address for Ethernet Board. Enter | Default value | |
the value in a decimal system as | 0.0.0.0. | ||
| |||
| "***.***.***.***". |
| |
| For RARP or DHCP/BOOTP, IP Address |
| |
| setting is not required because it will be set |
| |
| dynamically. |
| |
|
|
| |
Subnet mask | Set Subnet Mask for Ethernet Board. Enter | Default value | |
| the value in a decimal system as | 0.0.0.0. | |
| "***.***.***.***". | ||
|
| ||
|
|
| |
Gateway address | Set Gateway Address for Ethernet Board. | Default value | |
| Enter the value in a decimal system as | 0.0.0.0. | |
| "***.***.***.***". |
| |
RARP protocol | Set whether RARP requirement (i.e.dynamic | ENABLE : To use the function. | |
| IP Address acquisition) is conducted at | DISABLE: Not to use the | |
| Printer | function. | |
|
|
| |
DHCP/BOOTP | Set whether DHCP or BOOTP requirement | ENABLE : To use the function. | |
protocol | (i.e. dynamic IP Address acquisition) is | DISABLE: Not to use the | |
| conducted at Printer | function. | |
ROOT password | Set the root user password needed to | Default value | |
| change Ethernet Board settings using | None. | |
| TELNET or other utilities. Enter the |
| |
| password in 7 alphabets or numbers |
| |
|
|
|
140 | Fast Ethernet 7100e+ |
