Japan Tiger 7100e+ user manual

NetWare 3.1 Environment

Under NetWare 3.1, both print server mode and remote printer mode are supported. Although the procedures for setting the file servers are the same, there is a difference in the configuration of the Fast EtherNet. This section describes the settings for the file server and Fast EtherNet required to print in the NetWare3.1 environment.

See earlier in this chapter for:

•using the NetWare 4.1 print server mode via the NDS network;

•using the NetWare 4.1 print server mode via the bindery network;

•NetWare 4.1 remote printer mode.

In the following description, NetWare 3.1 is used as an example. Some of the on-screen indications and options may vary according to the OS version and system configuration.

In this example, the Fast EtherNet is connected to the file server “SOFT22-NW312”.

StartingPCONSOLE

For the purpose of this example we will use F: as the network drive name for logging in to the NetWare server.

1On the client machine, log in to the file server (“SOFT22- NW312”) as supervisor.

F:\>LOGIN SOFT22-NW312/supervisor

2Start PCONSOLE

F:\>pconsole

[Available Options] is displayed

Available Options

Change File Server

Print Queue Information

Print Server Information

English

User Manual 95