4.Register the host which was registered in Procedure 2 as the print server.

Example: In he case that “OP8c” is registered as the print server

1.Add the print server

#ruser –a –p OP8c

2.Activate the remote perinter daemon

#startsrc –s lpd

#mkitab ‘lpd:2:once:startsrc –s lpd’

5.Add the print queue using the smit command

1.Activate the smit command and convert to the item “Add print queue”

#smit mkrque

2.Select “remote” (the printer connected to the remote host) from “Type of connection”.

3.Select “Standard procedure” from “Type of remote print”.

4.Set the following items in “Add a standard remote print queue” (change configuration other than those indicated below according to the utilization environment)

Example: To set the direct output port “lp” with the print queue “OP8c_lp” and the print server “OP8c”

Queue to be added

“OP8c_lp”

Host name of the remote server

“OP8c”

Queue name of the remote server

“lp”

Type of print spooler of the

 

remote server

“BSD”

Description of printer name

 

of the remote server

“Optional

 

comment”

English

User Manual

63

Page 63
Image 63
Japan Tiger 7100e+ user manual Add the print server