Setting up the printer driver
Next, set up the printer software. After adding the printer driver 3. Click on “Add port”. in WindowsNT 4.0 as the “Default local printer”, perform the
setup.
In the following explanation, setting up OKIPAGE 8c(PS) as the printer in WindowsNT Server 4.0 is used as an example.
Please have ready the “Printer software
Please login with the Administrator’s authorization and then conduct the setup.
1.Set up the printer driver as the “Default local printer”.
Please refer to the your printer’s user manual for instructions on how to set up your printer driver.
2.Open the Properties “Port” of the printer driver.
4.Select the “Local Port” and click on “New port”.
Do not select any port other than the “Local Port”.
46 | Fast Ethernet 7100e+ |
