Generating Print Server,Printer and Print QueueClosingPCONSOLE

1Select [Quick Setup] and press the Enter key.

2The print server name, printer name and print queue name are generated automatically. Change them as required.

Input the print server name “8c-PSERVER”, printer name “P1” and print queue name “Q1-PS” in this example.

The banner type is generated according to the printer.

Print Service Quick Setup

Print Server:

8C-PSERVER

New Printer:

P1

New Print Queue:

Q1-PS

Print Queue Volume:

SOFT22-NW4_SYS

Banner Type:

PostScript

Printer Type:

Parallel

Location:

Manual Load

Interruption:

Unavailable

 

(Polling Mode)

Port:

LPT1

3Press the ESC key until [Save changes?] is on the screen, then select [Yes] and press the Enter key.

1Press the ESC key until [Exit?] is displayed. Select [Yes], then press the Enter key.

2Log out from the file server.

F:\>Logout

Starting the Print Server on File Server

1Use the file server console to start the print server.

If the print server has already been running, check that no- one is using it before restart it.

:LOAD PSERVER

2On the [Input Print Server Name] screen, press the Enter key to select the print server name you generated (previous page) from [Details of current context] and then press the Enter key. In this example, select “8C-PSERVER” from context “SOFT22.ENG7”.

Current Context

SOFT22.ENG7

Details of Current Context

.

..

8C-PSERVER

90

Fast Ethernet 7100e+

Page 90
Image 90
Japan Tiger 7100e+ user manual Banner type is generated according to the printer, Starting the Print Server on File Server